PRODUCTS CENTER
Mach-aire Fume Cupboard

Designed, manufactured and installed in accordance with BS EN14175 standards.


The following inspection certificates for fume cupboard are available.

Fume cupboard face velocity test

Tracer gas test

Robustness tracer gas test

Air exchange efficiency test

①fume cupboard pressure drop test ②sash test ③illumination test ④test。

Smoke test


Standard:BS EN14175

Width:1200/1500/1800mm

Depth:900mm

Height:2375mm

Worktop material:as specified by the customer

Table height from floor:900mm

Lining and baffle plate materials:as specified by customer

Cabinet

Base materials: 1.5mm thk high-quality galvanized steel plate

Painting: fully automatic electrostatic spraying with Akzo Nobel epoxy resin powder.

Vertical sash

Tempered glass/safety glass. Sliding door can stop at any position

Limited block

Working height can be locked at 500mm

Exhaust cover

Galvanized steel or PP

Lighting

400 LUX fluorescent lamps with light switch mounted on the columns on the outside of the fume cupboard

Electrical

Equipped with 4x 220V 10A 3-hole sockets mounted on the columns on the outside of the fume cupboard

Optional

Water & gas cock, PP cupsink


Kottermann Fume Cupboard

Complete range – the right fume cupboard for every application

Made from steel – high quality and long lasting

Perfect safety – certified by independent institutes

Ergonomic functions – to improve workflows

Exemplary sustainability – low operating costs, recyclable material

Quality “Made in Germany“ – best price-performance ratio


Bench-type fume cupboard

Standard fume cupboard for general use


EcoPlus fume cupboard

Low-energy fume cupboard


Walk-in and distillation fume cupboard

High-end experimental setups


VarioTop fume cupboard

Ergonomics in the workplace due to flexible working heights


High performance fume cupboard

Best protection when working with acids and high thermal loads


Radionuclide fume cupboard

For dealing with radioactive isotopes


Techlab Fume Cupboard

Standard:GB/T6412-1999

Width:1200/1500/1800mm

Depth:850 mm

Height:2350 mm

Worktop material:as specified by customer

Height of platform from the ground:900mm

Lining and baffle plate materials:as specified by customer


Cabinet

Base materials: 1.5mm thick high-quality galvanized steel plate


Vertical sash

Tempered glass/safety glass. Sliding door can stop at any position


Sash weight

Back-side weights with stainless steel suspension cable


Exhaust cover

Galvanized steel or PP


Lighting

400 LUX fluorescent lamps with light switch mounted on the columns on the outside of the fume cupboard


Electrical

Equipped with 4x 220V 10A 3-hole sockets mounted on the columns on the outside of the fume cupboard


Optional

Water & gas cock, PP cupsink


Mach-Aire Ventilated Enclosure

Designed, manufactured and installed in accordance with BS EN14175 standard, it is highly flexible and has less energy consumption, capable of achieving high containment level with low flows (as low as 100Liters/sec).Ventilated enclosures come in different types, including aluminum frame with Acrylic sash, and fully-welded sprayed steel plate with tempered glass sash; horizontal and vertical moving sashes are available.


Advantages:


    Low extraction volume with lower energy consumption


    Less expensive than conventional fume cupboards


    Can be easily fabricated into various sizes and specifications


    Maximum visibility with 360-degree view


    No extra lighting needed


    Easy installation and re-set


    Can be made to open from all four sides if needed to achieve optimized equipment access and maintenance


    Power and mechanical facilities can be installed on the ventilated enclosure


Mach-aire Fume Cupboard

Designed, manufactured and installed in accordance with BS EN14175 standards.


The following inspection certificates for fume cupboard are available.

Fume cupboard face velocity test

Tracer gas test

Robustness tracer gas test

Air exchange efficiency test

①fume cupboard pressure drop test ②sash test ③illumination test ④test。

Smoke test


Standard:BS EN14175

Width:1200/1500/1800mm

Depth:900mm

Height:2375mm

Worktop material:as specified by the customer

Table height from floor:900mm

Lining and baffle plate materials:as specified by customer

Cabinet

Base materials: 1.5mm thk high-quality galvanized steel plate

Painting: fully automatic electrostatic spraying with Akzo Nobel epoxy resin powder.

Vertical sash

Tempered glass/safety glass. Sliding door can stop at any position

Limited block

Working height can be locked at 500mm

Exhaust cover

Galvanized steel or PP

Lighting

400 LUX fluorescent lamps with light switch mounted on the columns on the outside of the fume cupboard

Electrical

Equipped with 4x 220V 10A 3-hole sockets mounted on the columns on the outside of the fume cupboard

Optional

Water & gas cock, PP cupsink


Kottermann Fume Cupboard

Complete range – the right fume cupboard for every application

Made from steel – high quality and long lasting

Perfect safety – certified by independent institutes

Ergonomic functions – to improve workflows

Exemplary sustainability – low operating costs, recyclable material

Quality “Made in Germany“ – best price-performance ratio


Bench-type fume cupboard

Standard fume cupboard for general use


EcoPlus fume cupboard

Low-energy fume cupboard


Walk-in and distillation fume cupboard

High-end experimental setups


VarioTop fume cupboard

Ergonomics in the workplace due to flexible working heights


High performance fume cupboard

Best protection when working with acids and high thermal loads


Radionuclide fume cupboard

For dealing with radioactive isotopes


Techlab Fume Cupboard

Standard:GB/T6412-1999

Width:1200/1500/1800mm

Depth:850 mm

Height:2350 mm

Worktop material:as specified by customer

Height of platform from the ground:900mm

Lining and baffle plate materials:as specified by customer


Cabinet

Base materials: 1.5mm thick high-quality galvanized steel plate


Vertical sash

Tempered glass/safety glass. Sliding door can stop at any position


Sash weight

Back-side weights with stainless steel suspension cable


Exhaust cover

Galvanized steel or PP


Lighting

400 LUX fluorescent lamps with light switch mounted on the columns on the outside of the fume cupboard


Electrical

Equipped with 4x 220V 10A 3-hole sockets mounted on the columns on the outside of the fume cupboard


Optional

Water & gas cock, PP cupsink


Mach-Aire Ventilated Enclosure

Designed, manufactured and installed in accordance with BS EN14175 standard, it is highly flexible and has less energy consumption, capable of achieving high containment level with low flows (as low as 100Liters/sec).Ventilated enclosures come in different types, including aluminum frame with Acrylic sash, and fully-welded sprayed steel plate with tempered glass sash; horizontal and vertical moving sashes are available.


Advantages:


    Low extraction volume with lower energy consumption


    Less expensive than conventional fume cupboards


    Can be easily fabricated into various sizes and specifications


    Maximum visibility with 360-degree view


    No extra lighting needed


    Easy installation and re-set


    Can be made to open from all four sides if needed to achieve optimized equipment access and maintenance


    Power and mechanical facilities can be installed on the ventilated enclosure


Mach-aire Fume Cupboard

Designed, manufactured and installed in accordance with BS EN14175 standards.


The following inspection certificates for fume cupboard are available.

Fume cupboard face velocity test

Tracer gas test

Robustness tracer gas test

Air exchange efficiency test

①fume cupboard pressure drop test ②sash test ③illumination test ④test。

Smoke test


Standard:BS EN14175

Width:1200/1500/1800mm

Depth:900mm

Height:2375mm

Worktop material:as specified by the customer

Table height from floor:900mm

Lining and baffle plate materials:as specified by customer

Cabinet

Base materials: 1.5mm thk high-quality galvanized steel plate

Painting: fully automatic electrostatic spraying with Akzo Nobel epoxy resin powder.

Vertical sash

Tempered glass/safety glass. Sliding door can stop at any position

Limited block

Working height can be locked at 500mm

Exhaust cover

Galvanized steel or PP

Lighting

400 LUX fluorescent lamps with light switch mounted on the columns on the outside of the fume cupboard

Electrical

Equipped with 4x 220V 10A 3-hole sockets mounted on the columns on the outside of the fume cupboard

Optional

Water & gas cock, PP cupsink


Kottermann Fume Cupboard

Complete range – the right fume cupboard for every application

Made from steel – high quality and long lasting

Perfect safety – certified by independent institutes

Ergonomic functions – to improve workflows

Exemplary sustainability – low operating costs, recyclable material

Quality “Made in Germany“ – best price-performance ratio


Bench-type fume cupboard

Standard fume cupboard for general use


EcoPlus fume cupboard

Low-energy fume cupboard


Walk-in and distillation fume cupboard

High-end experimental setups


VarioTop fume cupboard

Ergonomics in the workplace due to flexible working heights


High performance fume cupboard

Best protection when working with acids and high thermal loads


Radionuclide fume cupboard

For dealing with radioactive isotopes


Techlab Fume Cupboard

Standard:GB/T6412-1999

Width:1200/1500/1800mm

Depth:850 mm

Height:2350 mm

Worktop material:as specified by customer

Height of platform from the ground:900mm

Lining and baffle plate materials:as specified by customer


Cabinet

Base materials: 1.5mm thick high-quality galvanized steel plate


Vertical sash

Tempered glass/safety glass. Sliding door can stop at any position


Sash weight

Back-side weights with stainless steel suspension cable


Exhaust cover

Galvanized steel or PP


Lighting

400 LUX fluorescent lamps with light switch mounted on the columns on the outside of the fume cupboard


Electrical

Equipped with 4x 220V 10A 3-hole sockets mounted on the columns on the outside of the fume cupboard


Optional

Water & gas cock, PP cupsink


Mach-Aire Ventilated Enclosure

Designed, manufactured and installed in accordance with BS EN14175 standard, it is highly flexible and has less energy consumption, capable of achieving high containment level with low flows (as low as 100Liters/sec).Ventilated enclosures come in different types, including aluminum frame with Acrylic sash, and fully-welded sprayed steel plate with tempered glass sash; horizontal and vertical moving sashes are available.


Advantages:


    Low extraction volume with lower energy consumption


    Less expensive than conventional fume cupboards


    Can be easily fabricated into various sizes and specifications


    Maximum visibility with 360-degree view


    No extra lighting needed


    Easy installation and re-set


    Can be made to open from all four sides if needed to achieve optimized equipment access and maintenance


    Power and mechanical facilities can be installed on the ventilated enclosure